INDUCTION & FILTERS

1/6
R600 'EVO' AIR INTAKE 2.0 TSI EA888.4
FOR NEW 2.0 TSI 'GEN.4' ENGINES 

NEW!

VWR1200R600E TRIFOAM / VWR1200R601E COTTON

New! R600 'EVO' is our revised version of the most sophisticated induction system for the new EA888 gen4 2.0 TSI. For both the lower-output Garrett turbo and the higher-output Continental turbo engines. Hand built in the UK with airflow capability for 600hp and beyond. 

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/3
R600 COLD AIR INTAKE - MQB 2.0 & 1.8 TSI
VWR12 G7R600 TRIFOAM / VWR12 G7R601 COTTON
VWR12 G7R602 GEN.3B MAF ENGINES

Simply the most sophisticated induction system for 2.0 or 1.8 TSI engines (incl. MAF cars). Hand built in the UK to OEM standards of materials, workmanship and detailing. Now with a choice of filter: the giant Trifoam filter or our new Pleated Cotton option both double the standard surface area to give airflow for 600hp and beyond. 

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/6
CARBON COLD AIR INTAKE - 2.5 TFSI DAZA & DWNA
VWR1213RS

NEW!

Our stunning carbon Cold-Air Intake System kit for the Audi RS3 8V.2 and TTRS (DAZA and DWNA engines) enables cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for great power gains, particularly on tuned cars.

(Currently Right Hand Drive cars only)

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/6
R600 CARBON FIBRE LID UPGRADE
GLOSS: VWR121000  /  MATTE: VWR121001

NEW!

The R600 Carbon Fibre Lid upgrade updates your existing R600 with a stunning new look in the engine bay. Sold as a lid only, for retro-fitting to any R600 Intake of any age (note, not yet available for R600 EVO. Each lid is offered in your choice of either sophisticated matte finish, or stunning high gloss. 

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/3
AIR FILTER CHOICE - TRIFOAM OR COTTON?
VWR12 G7R600FO TRIFOAM / VWR12 G7R601FO COTTON

RacingLine's Intakes gives you a choice of Trifoam filter or Pleated Cotton Filter - either as a full intake kit, or just as a replacement filter for existing intakes. Which is right for you? Take a read here.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/3
R600 COTTON FILTER 'OVERSOCK'
VWR12 G7R600OS

Want the ultimate from your R600 Cotton Filter? 

Our new Cotton Filter 'Oversock' simply slides over the top of your Cotton Filter and protect the surface layer of the cotton from dust and dirt. The Oversock can be cleaned or just replaced to keep your Cotton Filter at its very best for years. 

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/3
R600 COOLANT UNDERHOSE - gen4 245PS
VWR17G8R600 GOLF 8 GTI / 2.0 TSI 245PS  lower output

NEW!

RacingLine's R600 Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look. A really nice and simple upgrade to any R600 intake. This version is for the new EA888 gen4 2.0 TSI 245PS engines with the lower-output Garrett turbo (such as Golf 8 GTI, Cupra Leon 245, Octavia vRS 245 and more)

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/3
R600 COOLANT UNDERHOSE
VWR17G7R600

RacingLine's new R600 Coolant Underhose reroutes the ugly factory hose underneath your beautiful intake for a much cleaner look. A really nice and simple upgrade to any R600 intake.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/5
REINFORCED BOOST HOSE KIT - MQB 1.8 / 2.0TSI 
VWR14004

NEW

The RacingLine Reinforced Boost Hose Kit replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels.  

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/5
REINFORCED BOOST HOSE KIT - POLO GTI AW

VWR140010

NEW!

The RacingLine 4-piece Boost Hose Kit for Polo 6 GTI AW (2017-2021) smooths airflow and optimises routing - for more effective performance in high boost, high temperature use. The beautiful smooth-flowing silicone replacements are uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels.  

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/5
COLD AIR INTAKE - POLO GTI AW

VWR12P2GTG   Gloss Finish

VWR12P2GTM   Matte Finish

NEW!

For the Polo GTI 6 AW with the 2.0 TSI EA888.3B engine, our beautiful carbon fibre high flow cold air Intake System, with a 20% larger high-flowing Trifoam filter inside. This intake will be an essential upgrade to support your power increases. In our testing, our intakes give the highest airflow and greatest power gains of any in the market.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/3
CUP EDITION OPEN INTAKE - MQB 2.0 & 1.8 TSI
VWR12 G7CUP

Prefer the appearance and sounds of an open intake? Then look no further. For MQB 2.0 or 1.8 TSI cars, our Cup Edition intake system takes inspiration from our pure track cars. Using the same giant Trifoam filter as R600 does, it offers every bit as much performance gain with added sound.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/4
'GEN.4' TURBO INLET SYSTEM
2.0 TSI EA888.4 CONTINENTAL TURBO 300 / 310 / 320PS
VWR120010

NEW!

For the higher-output gen.4 engines (Golf 8R, Audi S3 8Y etc), this Turbo Inlet System replaces both the highly restrictive plastic turbo elbow plus the factory inlet hose with a Turbo 90 Inlet combined with silicone Turbo Inlet Pipe. With a 10mm increase in internal diameter, these two matched parts work as a package to give great airflow increases and maximum power gains.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/5
TURBO 90 INLET - MQB 2.0 & 1.8 TSI
VWR12 G7R600ITINLET

Release a valuable power increase from fitting our 'thin wall' Turbo 90 Inlet to replace the highly restrictive standard plastic MQB 2.0 & 1.8 elbow. Compatible with all intake pipes and all factory turbos, and beautifully machined and gloss-anodised for a perfect, simple fitment. Twin O-rings ensure the perfect airtight seal.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/6
'GEN.4' TURBO INLET SYSTEM
2.0 TSI EA888.4 GARRETT TURBO 245PS ONLY
VWR120003

NEW!

A valuable power increase comes from fitting our Turbo Inlet System to replace both the highly restrictive plastic turbo elbow plus the inlet hose. With a 13.5mm increase in internal diameter, the beautifully machined Turbo 90 Inlet combined with the smooth-flowing silicone Turbo Inlet Pipe gives great airflow increases for maximum power gains. For the lower-output gen.4 engines (Golf 8 GTI, Octavia vRS etc) only.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/5
TURBO MUFFLER DELETE - MQB 2.0 & 1.8 TSI
VWR16 G7TDEL

A valuable part of your MQB car's smooth breathing - replace the disruptive airflow of the stock part with our precisely-machined single-piece Turbo Muffler Delete. And, as a side benefit, you'll get to hear your turbo working at last.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/5
TAPERED TURBO MUFFLER DELETE 
2.0 TSI EA888.4 GARRETT TURBO 245PS ONLY
VWR160000

For the new EA888 gen4 2.0 TSI 245PS engines with the lower-output Garrett turbo (such as Golf 8 GTI, Cupra Leon 245, Octavia vRS 245 and more) this new Tapered Turbo Muffler Delete plus Silicone Joiner is a valuable part of your car's smooth breathing.

  • Facebook - Grey Circle
  • Twitter - Grey Circle

NEW!

TURBO INLET HOSE - MQB 2.0 & 1.8 TSI
1/4
VWR12G7R600ITRED/BLA/BLU/GREY
VWR12 G7R602ITBLA  FOR Gen.3B MAF VEHICLES

Another essential element to the airflow between intake and turbo is our Turbo Inlet Hose. Replace the restrictive standard plastic 'bellows' pipe with our free-flowing, ultra smooth reinforced silicone pipe. Now with fitment for 2.0 TSI EA888.3B 'MAF' engines.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/4
HIGH-FLOW PANEL AIR FILTER
MQB 2.0 TSI and 2.0 TDI
VWR11 G701

Our Trifoam High Flow Panel Filters use the exact same filter material as our intake systems to provide the perfect starting point for your car's upgrades. A simple drop-in replacement for your factory paper filter, giving a valuable boost to engine efficiency as a perfect compliment to either a standard engine or those running Stage 1 calibrations.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/5
COLD AIR INTAKE - MQB 2.0 TDI 
VWR12 G70D

For the 2.0 TDI engines in MQB cars, our new high-flowing Trifoam cold-air intake is an essential upgrade, especially if your TDI is running higher power. Developed specifically for the 2.0 TDI, in our testing, this intake gives much the highest airflow of any rivals, and greatest power gains.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/1
INTAKE MAINTENANCE KIT & ADVICE
VWR12 0000

This RacingLine Oil and Cleaner Kit is essential to help you keep your filter in peak condition at all times and ensure that the complex triple-layer foam continues to deliver its power and filtration benefits for many years. It’s important that only this Oil and Cleaner Kit are used, as they've been specially formulated to work with our foam air filter material. 

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/7
COLD AIR INTAKE - 1.0 TSI
VWR12  UPGT

Welcome to our 1.0 TSI intake for Up! GTI and others. This high flow cold air Intake System has our high-flowing Trifoam filter inside and is be an essential upgrade to support your power increases. In our testing, our intakes will give the highest airflow and greatest power gains of any in the market.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/8
CARBON INTAKE SYSTEM - AUDI RS4 / RS5 (B9)
VWR12 41RS4

NEW!

Audi RS4 & RS5 (B9) 2.9 TFSI engines will really benefit from our new Carbon Intake System. The giant Trifoam filter at the heart of the intake is hand built in the UK to OEM standards of materials, greatly increasing the standard surface area to give massive airflow gains. All finished and beautiful detailed with a stunning matte carbon construction. 

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/8
CARBON INTAKE SYSTEM - AUDI S4 / S5 (B9)
VWR12 41S4

Simply the most sophisticated induction system for the current Audi S4/S5 (B9) 3.0 V6 TFSI engines. Hand built in the UK to OEM standards of materials, workmanship and detailing with a stunning matte carbon construction. But more importantly, the giant Trifoam filter greatly increases the standard surface area to give massive airflow gains. 

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/5
TURBO INLET ELBOW - 1.0 TSI
VWR12 UPINLET

Our new 1.0 TSI Turbo Inlet Elbow transforms the airflow reaching your turbocharger.

It's compatible with your factory intake box, ideally combined with our Performance Filter. 

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/4
HIGH-FLOW PANEL AIR FILTER - 1.0 TSI
VWR11 UPGT

Our Trifoam High Flow Panel Filter uses the exact same filter material as our intake systems to provide the perfect starting point for your car's upgrades. A simple drop-in replacement for your factory paper filter, giving a valuable boost to engine efficiency as a perfect compliment to either a standard engine or those running Stage 1 calibrations.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/5
INTAKE SYSTEM - GOLF 6R & SCIROCCO R
VWR12 G60R

For the 2.0 TFSI ‘KO4’ engines in Golf 6R and Scirocco R, our high-flowing Trifoam Cold Air Intakes are an essential upgrade. In our testing, this intake gives the highest airflow and greatest power gains of any on the market.

  • Facebook - Grey Circle
  • Twitter - Grey Circle
1/4
HIGH-FLOW PANEL AIR FILTER - GOLF 7 1.2, 1.4
VWR11 G714

The perfect starting point for your MQB 1.2/1.4 engine upgrades, our Trifoam High Flow Panel Filters use the exact same filter material as our intake systems. A simple drop-in replacement for your factory paper filter, giving a valuable boost to engine efficiency as a perfect compliment to either a standard engine or those running Stage 1 calibrations.

  • Facebook - Grey Circle
  • Twitter - Grey Circle