TURBO BOOST PIPE HOSE KIT FOR VW POLO GTI AW 2017+ 2.0 TSI VWR140010
VW POLO GTI AW COLD AIR INTAKE, CARBON FIBRE : VWR12P2GTG GLOSS FINISH; VWR12P2GTM MATTE FINISH
Polo GTI MK6 AW 2017-2021
Cold Air Intake
The highest-performing, race-bred carbon fibre cold-air (induction) intake for the Volkswagen Polo GTI mk6 AW.
Note: not for facelift Polo GTI AW.2 models.
What's so
special?
Our latest Cold-Air Intake System kit for the Polo GTI mk6 AW enables cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for great power gains, particularly on tuned cars.
Our giant High-Flow TriFoam™ triple-layer construction is simply the best filtration material on the market, and is the key to the power gains achieved
Each filter is handmade in the UK, with a surface area over 20% larger than the factory filter at 51,950mm2
The intake uses stunning 3K twill carbon fibre for the one-piece front scoop and filter housing for ultra-light weight and improved thermal insulation to keep IATs down
It's not just about performance; the stunning carbon weave of the intake (in your choice of gloss or matte finish) will enhance your engine bay every time you lift the bonnet!
GIANT TRIFOAM® FILTER
Our unique giant Trifoam® filter construction at the heart of this intake is over 20% larger than factory, and hand-made in the UK for the perfect filtration and minimum restriction.
SOUND QUALITY
You'll hear the rich induction noise from this race-bred intake as soon as you accelerate hard. However, as a fully-enclosed intake, volume levels are well-contained.
POWER GAINS
Lots of cold, fresh air is collected via the single-piece intake scoop, with CFD-developed internal airflow to feed the whole filter surface area, with minimal turbulence.
Confirmed applications.
VWR12P2GTG Gloss Finish
VWR12P2GTM Matte Finish
VW POLO GTI AW 2017-2021
Note: not for facelift Polo GTI AW.2 models with gen.4 engine and MAF
Precision engineered for
perfect performance.
Trifoam™ filter construction, a triple-layer laminate of open-cell polyurethane foam, gives an exceptionally high level of filtration
Beautiful 3K-twill carbon fibre is strong, lightweight and with excellent thermal transfer characteristics to help keep IATs down
Matching reinforced Silicone Turbo Inlet Hose makes the most of the airflow gains from the Intake through to turbo
Full install kit of quality stainless steel hose clips and all fitting hardware included - to look good and keep looking good
Love your filter.
The filter element is at the heart of your RacingLine intake. And, as with all specialised parts developed for high performance and motorsport use, the filter element must be a part of your regular maintenance schedule.
Our Oil and Cleaner Kit will help you keep your filter in peak condition at all times and ensure that the complex triple-layer foam continues to deliver its power and filtration benefits for many years.
PART NO: VWR12 0000
GLOSS CARBON
VWR12P2GTG
MATTE CARBON
VWR12P2GTM
Other products to set
your pulse racing.
STAGE 2 'EVO' BRAKE KIT
The Stage 2 'Evo' Performance Brake Kit uses a beautiful monoblock, 4-piston caliper and 345mm single-piece disc, specifically for Polo GTI AW.
REAR BODY BRACE
Reinforce your Polo GTI AW bodyshell at its weakest point for sharper dynamics and improved handling.
SPORT SPRINGS
Our Sport Springs are specifically developed for the Polo GTI AW. Tighten up your dynamics and lower the ride height to perfection.
HIGH-FLOW TRIFOAM™ FILTER
HANDMADE IN THE UK
