WHAT DOES THE BODY BRACE DO?
Modern cars like the Polo AW & other MQB A0 have a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. That's why cars like the Golf Clubsport S gets a factory rear brace.
The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together.
The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into the beautiful, ultra-stiff carbon fibre link bar drastically stiffening the rear of the chassis.
By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do.
Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin.
The clever design means that installation is simple, using existing body mounting points with no drilling and no removal of trim required, and is completely reversible.
Compatible with rear seats up or down (or removed altogether). The full interior can be maintained even with the installation of the Rear Body Brace.
REAR BODY BRACE FOR POLO GTI AW 2017+, VWR810003
POLO GTI AW
REAR BODY BRACE
TIGHTEN UP YOUR DYNAMICS
Want to sharpen up your Polo GTI AW handling responses? Our beautiful billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive.
GLOSS BLACK & CARBON
POLO GTI AW
Not to be used as a mounting point for seatbelts or race harnesses.
PRECISION ENGINEERED FOR PERFECT PERFORMANCE.
Brackets locate into rear seat mounts, no drilling or cutting
All mounts are CNC 5-axis machined from solid billet
3K twill weave carbon fibre ultra-stiff 35mm link bar
FEA design maximises stiffness whilst keeping weight down
Aerospace-grade T6-6061 Aluminium bracketry used throughout
VWR810003 For MQB A0 models
VW Polo 6 GTI 2.0 TSI AW
VW Polo 6 AW
Skoda Fabia IV
Thin, low-profile design means minimum impact on boot space and no effect on rear seat operation, up or down.
Clever design means fitting is quick and simple. Completely reversible without trace for removal.
No cutting, no drilling needed. By cleverly re-using the strongest parts of the body, there's no need to modify.
WHAT'S IN THE KIT?
2x Billet Mounting brackets
Carbon Brace Bar
All required fitting hardware
OTHER PRODUCTS TO SET YOUR PULSE RACING.
STAGE 2 'EVO' BRAKE KIT
The Stage 2 'Evo' Performance Brake Kit uses a beautiful monoblock, 4-piston caliper and 345mm single-piece disc, specifically for Polo GTI AW.
BOOST HOSE KIT
The Polo 6 GTI AW Boost Hose Kit smooths airflow and optimises routing - for more effective performance in high boost, high temperature use.
Our Sport Springs are specifically developed for the Polo GTI AW. Tighten up your dynamics and lower the ride height to perfection.