TURBO BOOST PIPE HOSE KIT FOR GOLF mk7R, GOLF mk7 GTI, AUDI S3 8V, AUDI TT, LEON CUPRA, OCTAVIA vRS and more
EA888.3 2.0 TSI, VWR140004
BOOST HOSE UPGRADE.
For all VWG MQB 2.0 TSI.
INTERNALLY WIRED, STEPPED, SUPER-STRONG SILICONE.
The RacingLine Boost Hose Kit for 2.0 TSI MQB smooths airflow and optimises routing - for more effective performance in high boost, high temperature use.
DO THEY DO?
Welcome to the ultimate Boost Hose Kit for 2.0 & 1.8TSI MQB vehicles. The RacingLine Boost Hose package replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels.
By minimising restrictions, the smoother airflow and optimised routing ensures the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence
Direct OEM replacement: simply remove the old weak, flexible rubber hoses and replace them with our five-piece kit
Pressure tested far beyond the turbo’s capabilities, the system maintains performance under extreme temperature and high-boost conditions
Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus non-stepped designs
FIVE PIECE KIT:
The RacingLine Boost Hose Kit is probably the only one on the market which comes with five hoses included - however you'll only need to fit four of them.
The choice of which Turbo Outlet Pipe (4a & 4b) depends on whether your car is pre- or post-2017. It's really easy to choose which to use, as it's either long or short depending on what OEM pipe you remove meaning that (unlike other kits) you can't really get this wrong!
Smooth, port-matched transitions for uniform, laminar airflow through the joints.
PRECISION ENGINEERED FOR PERFECT PERFORMANCE.
Constructed from internally-wired reinforced high quality silicone, guaranteeing great rigidity to prevent deformation under high boost or heat loads
Fluorosilicone interior surface resists oil and gasoline permeation providing extra protection against deterioration
Stainless steel Mikalor-brand clamps reduce the risk of boost leaks with increased connection strength and decreased hose slippage
Multi-ply silicone outer construction is hand-wound for performance under extreme conditions, ensuring both heat and burst resistance
2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines
VW Golf 7 & 7.5 GTI & Clubsport
VW Golf 7 & 7.5 R
VW Golf 7 & 7.5 1.8 TSI
VW Passat 2.0 TSI B8
VW Arteon 2.0 TSI
VW T-Roc R 2.0 TSI
VW Tiguan II 2.0 TSI
VW Jetta / GLI 7
Audi S3 8V
Audi A3 2.0 TSI / 1.8 TSI 8V
Audi TT 3 2.0 TSI 8S
Audi TTS 3 2.0 TSI 8S
SEAT Leon III Cupra 5F
SEAT Leon III 1.8 TSI 5F
Skoda Octavia III vRS 2.0 TSI 5E
Skoda Superb III 1.8 / 2.0 TSI 3V
Within the kit, our unique super-strength Intercooler Boost Hoses have steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.
Our OEM Performance Software is simply the most effective modification you can make to the 2.0 and 1.8 TSI engines, especially when used alongside our performance hardware.
That's what makes the OEM difference.
SOFTWARE DESIGNED FROM THE GROUND UP.
Give your vehicle the OEM treatment.
OTHER PRODUCTS TO SET YOUR PULSE RACING.
R600 COLD AIR INTAKE
Simply the most sophisticated cold air intake on the market - for all MQB platform cars using the 1.8/2.0 TSI engine
A simple replacement high-flow replacement for the restrictive, disruptive turbo muffler - freeing up power and turbo sounds.
TURBO MUFFLER DELETE
TURBO 90 INLET
Replace the restrictive plastic factory turbo inlet elbow with this High Flow Turbo 90 piece and free up your intake's potential.