DETAILS & APPEARANCE
DSG REPLACEMENT PADDLE BLADES
Cool, sharp and positive changes are guaranteed from our replacement DSG blades. These are complete billet aluminium blades, not cheap & nasty stick-on alternatives, completely replace the standard paddles. Look great, feel great with precision shifting.
VWR49G700 / VWR49G701/ VWR494100
MQB REAR BODY BRACE
VWR8130S3 Audi A3/S3/RS3 3/4/5 door
Want to sharpen up your handling responses? Our beautiful new billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive. For all Golf 7/7.5, SEAT Leon 5F, Skoda Octavia 5E and Audi A3/S3/RS3 8V models.
REAR BODY BRACE - MQB A0 Polo GTI (AW)
Want to sharpen up your Polo GTI AW handling responses? Our beautiful billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive.
FRONT BODY BRACE - AUDI B9 S4/A4/S5/A5
Want to sharpen up your Audi B9’s handling responses and steering feel? Our beautiful new billet Strut Brace replaces the cheap factory bars to reinforce the bodyshell for a more pleasurable and precise drive.
MQB UNDERBODY TUNNEL CHASSIS BRACES
VWR810004 / VWR810005
Our new MQB Billet Underbody Braces replace the thin stamped-steel OE tunnel braces with intricately machined aluminium replacements. The result? Improved body stiffness and importantly much better exhaust clearance.
FUEL FILLER CAP
VWR19G711 & VWR190000
Nobody likes filling up, right?
But our new Billet Fuel Filler Cap is beautifully over-engineered in customary Racingline fashion to give an exquisite feel and beautiful appearance. Makes pumping gas a little more of a pleasure!
BONNET/HOOD GAS STRUT - GOLF 8
A Gas Strut conversion to lift & hold your bonnet/hood for Golf mk8. Just like it should have come from the factory in other words....
Our new Gas Strut has been developed exclusively for all Golf mk8 models to replace the nasty manual bonnet/hood prop that it comes with. Simple DIY fitting in 10 minutes.
STUD & NUT KIT
VWR630000 / VWR630001
Remove and refit your wheels all the time? Our Stud & Nut kit gives a stronger fixing method than using the original wheel bolts. Plus they're a much quicker method to swap wheels for motorsport / track use as well.
REAR WIPER DELETE
Stripping weight out of your track car? Prefer that clean, uncluttered look without the rear wiper?
Then this Rear Wiper Delete kit is for you. A simple, affordable upgrade that is an easy DIY install.
BRAKE FLUID CAP
The RacingLine Brake Fluid Cap will hold your brake master cylinder at perfect pressure equalisation to ensure that your high-performance braking system is performing exactly as it should. Not to mention the beautiful appearance and pleasure of checking your brake fluid!
OIL FILLER CAP: 2.0 TSI EA888 gen4 MQB EVO
The Billet Oil Cap is for the new EA888 gen4 engines and in in customary RacingLine fashion, it's engineered to give an exquisite feel and appearance every time you top up your oil. Replace that cheap, plastic cap this complete replacement version for a tight secure seal every time.
OIL FILLER CAP: 1.8/2.0 TSI EA888 gen3 MQB
The Billet Oil Cap is beautifully over-engineered in customary RacingLine fashion to give an exquisite feel and appearance every time you top up your oil. The internally-sprung mechanism in the cap provides an effortless, yet incredibly satisfying “click” when screwed into place.
OIL FILTER HOUSING
Tired of staring at that cheap, brittle plastic oil filter housing every time you lift your bonnet? Us too, and that's why we've come up with our beautiful billet Oil Filter Housing to replace it. You can forget about the problems of cracked plastic housings forevermore.
DSG OIL FILTER HOUSING
Our beautiful new billet DSG Oil Filter Housing will prevent the problems of warped and cracked plastic housings forevermore. The aluminium housing helps with oil cooling as it has much greater heat transfer properties. For all DSG/Stronic 6 and 7-speed gearboxes.
The beautiful quality and durability of our Billet Oil Dipstick makes it a great upgrade from the factory dipstick - as a plastic part exposed to the significant heat of a modified engine, the stock seal has been known to fail. Our dipstick prevents leaks and ensures a truly airtight seal which will keep the engine running smoothly for ever more.
WASHER FLUID CAP
Doesn’t your car deserve better than cheap plastic parts in the engine bay? If so, this billet aluminium Washer Fluid Cap provides a beautiful complete replacement for your factory blue plastic cap to really smarten up the under-bonnet visuals. Produced from billet aluminium, then hard-anodised in gloss black for a long lasting, high quality finish.
COOLANT EXPANSION CAP
Our replacement billet Coolant Expansion Cap for MQB & A5-platform models is a full replacement for the original plastic part. Keeping that coolant expansion tank sealed is a critical part of your car's cooling system. This replacement cap will ensure that proper pressure is maintained, and never exceeded, especially important on high-performance engines.
OIL FILTER HOUSING - AUDI B9 S & RS
Replace your Audi B9 S4, S5, RS4, RS5, SQ5 plastic oil filter housing with our beautiful gloss-black billet Oil Filter Housing to replace it. You can forget about the problems of cracked plastic housings forevermore.
REMOTE WASHER REFILL KIT
To fit our Oil Management Kit on Golf 7R and Audi S3 models, you will also need this Remote Washer Refill Kit. The kit replaces the top half of the factory washer bottle to still allow you to refill your washer fluid easily and neatly via a beautifully high-gloss filler cap.
MAGNETIC SUMP OIL DRAIN PLUG: EA888.3 & 3B
The new Magnetic Sump Plug for 1.8 & 2.0 TSI EA888.3 and .3B engines uses our clever 'True-Lock' system for the plastic oil pan. It's a simple, cost effective upgrade to protect your motor by separating out the minute abrasive and ferrous metal particles from the drivetrain fluids, stopping them circulating through lubrication systems.
MAGNETIC SUMP OIL DRAIN PLUG: MANY MODELS
The Magnetic Sump Plug attracts and separates out the minute abrasive and ferrous metal particles from your drivetrain fluids, stopping them circulating through the lubrication systems. A simple, cost effective upgrade to protect your motor, for almost all non-MQB models & engines.
HALDEX MAGNETIC SUMP PLUG SET
Our new RacingLine Haldex Magnetic Plug Set attracts and separates out the minute abrasive and ferrous metal particles in your Haldex’s lubrication system, reducing the sludge that blocks the filter. Protect your AWD system and keep it operating like it should with this simple cost effective upgrade.
AWD DIFFERENTIAL MAGNETIC SUMP PLUG
RacingLine’s Magnetic AWD Differential & Transfer Box Oil Plug set protects your AWD car’s differential's lubrication system by attracting and separating out the minute abrasive and ferrous metal particles that are carried by the oil. For 'Haldex' AWD cars this plug set fits both front Transfer Box and Rear Differential.
RACINGLINE CAR BADGE
VWR8100000 / VWR8100001
The finishing touch for you RacingLine-equipped pride and joy. Our new 100mm long OEM-quality car badge is just what is needed to differentiate your car from all the the rest.
In your choice of Bright Chrome or Gloss Black.
RACINGLINE SIDE STRIPES
VWR8100001 / VWR8100002
Our trademark Side Stripes are the perfect decal for any RacingLine car. Designed to fit along the bottom of your doors, they will subtly accentuate the sporty lines of your car.
Available in satin black or silver, in long or short lengths. Note that as these are generic decals, some cutting may be necessary to ensure the perfect fit for your car.
RACINGLINE CLOTHING RANGE
Wear it with pride. Whether hanging out at the track or making a statement around town, our RacingLine merchandise range has got what it takes!
RACINGLINE 'WHEEL NUT' KEYRING
Here's a fun finishing touch for any RacingLine car owner - our new 'wheel nut' keyring.
One of our wheel nuts, drilled with a keyring attachment, it's the perfect addition to your car key. Lovely lightweight aluminium, delicately anodised in black with the RacingLine logo laser-etched in.