RACINGLINE 2.5 TFSI AUDI RS3 8V.1 CZGB pre-facelift remap tuning software
Audi RS3 8V.1 (pre-facelift)
2.5 TFSI CZGB - Software Tuning Options
High five.
Our RacingLine OEM+ Performance Software is simply the most effective modification you can make to the earlier RS3 8V.1 (pre-facelift) 2.5 TFSI engines (CZGB). Simply, exceptional gains.
Every aspect of an engine’s behaviour is controlled by the calibration software installed on the Engine Control Unit (ECU), your car’s computer.
Read below to see what's on offer with OEM+ and how it can significantly & safely enhance the power of your vehicle:
STOCK
367PS
465NM
270KW
460NM
362BHP
343lbft
420PS
572NM
308KW
572NM
414BHP
422lbft
465PS
607NM
342KW
607NM
458BHP
448lbft
STAGE 1
STAGE 2
REQUIRES TCU
GEARBOX CALIBRATION.
All stock power & torque figures are manufacturer-stated outputs.
This calibrations is developed to run on superunleaded pump fuel of 98 Ron or above.
All figures are measured at crankshaft on RacingLine Superflow Dyno.
As dyno readings can vary, these figures intended for illustrative purposes only.
CONFIRMED APPLICATIONS
CZGB Engine Code
Audi RS3 2015-2016 8V.1
(pre-facelift 367ps model only)
HARDWARE OPTIONS
The below table highlights the minimum hardware requirements for each stage as well as recommending optional components.
REQUIRED
NOT REQUIRED
OPTIONAL
High Flow Intake
Sports Cat Downpipe
Performance Intercooler
DSG Software Tune
STAGE 1
STAGE 2
NOTE
All of the above power figures are accurate, tested illustrations; however, please do remember that actual power figures can vary up or down slightly dependant on many factors such as the condition of your engine & ancillaries, the fuel quality, other modifications fitted, and even testing methods.
Also please remember that changing your car's software will affect its manufacturer warranty. It is your responsibility to notify your insurer and to ensure that your car still complies with all your local road laws. Please consult your supplying dealer for full information.
30
DAYS
money back guarantee
BENEFITS OF OEM+
UNIQUE APPROACH
It's by reprogramming the very basis
of the controller itself that we
achieve the results we get - just as
the manufacturers themselves work.
MATCHED TO HARDWARE
No other brand can offer you such a
comprehensive 'full-car' tuning
solution. Our Performance Parts
range is the most complete on the
market, all matched perfectly to
the OEM+ software.
GREAT PERFORMANCE
By starting from scratch for each
calibration, OEM+ achieves a very
different level of performance and
drivability. It's never just about winding
up the peak power.
UPGRADES FOR LIFE
Free upgrades on your car for as long
as you own it. Start with OEM+
Stage 1, then we will give you Stage
2 and even Stage 3 Performance
Software for free!
PEACE OF MIND
We are uniquely positioned to tap into a
vast knowledge base and resources
network in our development. And we're confident enough that you'll love it that we offer a 30 day full money-back guarantee.
RETURN TO STOCK
Should you ever want to return your
car to standard, the OEM+ system
has the facility to return your ECU
to 'True Stock', the exact state it
was in prior to installation of OEM+
tuning.
RECORD-BREAKING
OEM+ PERFORMANCE TUNING FOR AUDI 2.5 TFSI: Stock turbo world record!
OEM+ DELIVERY AND PURCHASE
Our OEM+ software can be purchased and installed through any one of our recognised worldwide OEM+ Technical Centres. Simply visit our dealer locater page to find your nearest OEM+ agent and drop them a line to find out more information or book in.
Some people ask why we only supply OEM+ through dealers, rather than choosing a 'flash at home' option. It's because to properly access a car's ECU programming is a complex and technical task. We need our network of Technical Centres to verify the health of your car prior to flashing, to ensure that the programming has been successfully installed and finally to sign-off the successful performance after install. Plus, to be there for you should you have any concerns post-purchase.
Some jobs are best left to the experts!
