All the power in the world is next to useless if your stock brakes aren’t up to it. Our Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road Polo, S1, Ibiza.
We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet, all at an affordable price.
Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers.
This lightweight construction gives significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at just 4.4kg (9.7lb).
A bigger, 330mm ‘triple-grove’ disc gives greater heat capacity, thus reducing the effect of fade.
Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars.
The 'Monoblock' construction of our 4-piston aluminium thin-profile calipers give extreme stiffness and light weight, and aid in wheel clearance packaging.
GROOVED & VENTED
The 330mm discs, with integral mounting bells, use our ‘Triple Groove’ design across the face for improved bite and debris clearance.
Discs made from high cast carbon - a mixture of high quality steel combined with carbon; giving a far higher friction coefficient compared to normal steel rotors.
Engineered exclusively for VWG cars, with piston sizes matched to master cylinders and servos for perfect responses. A full kit of supporting bells, brackets and lines included.
Composite Ceramic Sport Pads are included with the ideal compound for fast-road use. Note: these pads are not suitable for track use.
FULL INSTALL KIT
Everything you need for installation: discs, callipers, mounting brackets, fast road pads, braided steel lines. Bolt on & drive!
PRECISION ENGINEERED FOR PERFECT PERFORMANCE.
330x28mm one piece disc with directional curved cooling vanes
Triple hook groove design for improved bite & debris clearance plus reduced distortion / vibration
Full fitting & install hardware kit of brakes and lines
Composite Ceramic fast-road pads with working temperature 50C-700C & 0.48 friction rating. Harder compound pads are also available
Braided stainless steel brake lines for firm pedal response
Saving unsprung weight is really important on a performance car.
So we've spend a lot of our development and design time making sure that our Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving - a single piece caliper is stronger, stiffer and can therefore be lighter than equivalent 2-piece calipers.
FULL BRAKE ASSEMBLY, per corner
DISC / ROTOR, each
CALIPER, incl pads and brackets
13.75kg / 30.25lb
9.35kg / 20.57lb
4.4kg / 9.68lb
Minimum 17" wheel diameter required. 7mm spacers required for use with most factory wheels, no spacer generally required for aftermarket rims.
Audi S1 2.0 TFSI 2015-2018
Volkswagen Polo GTI 1.8 2009-2018 6R & 6C
Seat Ibiza Cupra 1.8 2017-2018 6J
OTHER PRODUCTS TO SET YOUR PULSE RACING.
COLD AIR INTAKE
The highest-performing, race-bred cold-air induction system for the Audi S1, Polo GTI and Ibiza Cupra.
RACING BRAKE FLUID
Your brake system is only ever as good as your fluid. Our Racing Brake Fluid is one of highest specifications available - don't compromise your stopping power with anything less.
Remove and refit your wheels all the time? Our Stud & Nut kit is a much quicker method to swap wheels for motorsport / track use.
STUD & NUT KIT