Flow that airflow smoothly from your intake into the turbo.

HI-FLOW TURBO INLET HOSE.

WHEN AIRFLOW IS KING.

SILICONE SMOOTHNESS.

racingline turbo hose,turbo inlet,turbo pipe,silcone inlet hose,silicon turbo inlet hose,racingline turbo inlet hose,racingline turbo inlet hose, golf 7 r turbo inlet hose,golf gti turbo inlet hose, audi s3 turbo inlet hose, leon cupra turbo inlet hose,octavia turbo hose, audi tt turbo inlet hose

WHAT

IT DOES.

The VWR High-Flow Turbo Inlet Hose is for all MQB 2.0 and 1.8 TSI cars. The reinforced Inlet Hose has been engineered to increase air flow through to the turbocharger as the perfect compliment our VWR R600 Cold Air Intake or even the standard airbox.  

A simple fitment, it replaces the entire restrictive rear factory plastic ‘bellows’ pipe between the airbox and the turbocharger inlet. 

The large diameter smooth-flowing silicon hose, crucially with enough compliance to allow for adequate engine movement without causing damage to the intake. 

Back-to-back comparisons with the factory pipe on our flow bench reveals an impressive improvement in airflow, and makes this hose a great compliment to the R600 intake.

Put simply, you'll be wasting a chunk of the hard-gotten gains from your high-flow intake system if you leave this pipe standard.

COMPATIBILITY

The Turbo Inlet Hose is compatible with all MQB EA888.3 1.8T and 2.0T cars. Works with the VWR R600 intake, the factory airbox, or any other aftermarket intake.

POWER GAINS

By taking away the standard plastic bellows pipe's restrictive and turbulent airflow path between the intake and the turbocharger, the High-Flow Turbo Inlet Hose gives a worthwhile power gain.

EASY FIT

Fitting is very straightforward. The kit is installed in around 10 minutes using just hand tools.   And easily returned to standard, should you ever wish.

racingline turbo hose,turbo inlet,turbo pipe,silcone inlet hose,silicon turbo inlet hose,racingline turbo inlet hose,racingline turbo inlet hose, golf 7 r turbo inlet hose,golf gti turbo inlet hose, audi s3 turbo inlet hose, leon cupra turbo inlet hose,octavia turbo hose, audi tt turbo inlet hose
Wide web.png

COLOUR

THERAPY.

NARDO GREY        GLOSS BLACK        GLOSS BLUE        GLOSS RED

PRECISION ENGINEERED FOR PERFECT PERFORMANCE.

The engine moves considerably under load and so our turbo inlet hose allows just the right amount of flex. 

Reinforced silicone elements embedded in critical areas to avoid compression under load.

 Maximum diameter ultra smooth, high-gloss silicone with  smooth transitions promotes airflow. 

Constructed from reinforced high quality silicone, our hose offers great rigidity to prevent deformation under load or heat.

CONFIRMED APPLICATIONS

2.0 TSI & 1.8 TSI MQB / EA888 Gen 3 engines

VWR12 G7R600IT  RED/BLA/BLU/GREY

CONFIRMED APPLICATIONS

2.0 TSI MQB / EA888 Gen.3B 190 hp engine with MAF

VWR12 G7R602ITBLA  (Black only)

WEB.png
HOW DO I KNOW IF MY CAR IS 'MAF'?

Check before you order!

The new 2.0TSI EA888 Gen.3B 'Miller cycle' engines (all producing around 190hp) are becoming ever more popular across the VWG range.

As these engines now use a Mass Airflow Sensor (MAF), they require a different version of the R600 intake (VWR12 G7R602) and the Turbo Inlet Hose (VWR12 G7R602ITBLA).

It's very easy to check your car. Does it have this sensor and wiring shown in the picture? That's the MAF sensor, so make sure you get the correct R600 and Hose. 

2.0 TSI MQB / EA888 Gen.3B 190 hp engine with MAF

VWR12 G7R602ITBLA  (Black only)

'MAF' TURBO INLET HOSE
2019 VW Golf R Mk7.5 - Rotiform DTM Forg

Our OEM   Performance Software is simply the most effective modification you can make to the 2.0 and 1.8 TSI engines, especially when used alongside our performance hardware.

That's what makes the OEM   difference.

+

+

SOFTWARE DESIGNED FROM THE GROUND UP.

Give your vehicle the OEM   treatment.
+

CHOOSE YOUR MODEL

TO SEE YOUR SOFTWARE 

OTHER PRODUCTS TO SET YOUR PULSE RACING.

R600 COLD AIR INTAKE

Simply the most sophisticated cold air intake on the market - for all MQB platform cars using the 1.8/2.0 TSI engine

 

A simple replacement high-flow  replacement for the restrictive, disruptive turbo muffler - freeing up power and turbo sounds.

TURBO MUFFLER DELETE

TURBO 90 INLET

Replace the restrictive plastic factory turbo inlet elbow with this High Flow Turbo 90 piece and free up your intake's potential.

ABOUT US

Forever at the forefront of performance automotive. All of our products are created in the world's toughest development lab: motorsport. We push the limits and reach new heights on track; then refine our products so they always give you the performance you need when you want it on the road.

  • Grey Facebook Icon
  • Grey Instagram Icon
  • Grey Twitter Icon
  • Grey YouTube Icon
© RACINGLINE 2021

NEW RELEASES

Would you like to keep up to date with 

all the latest news and product releases from RacingLine?

Simply enter your details below to be added onto our mailing list and you will be the first to know!

racingline

Yes, by subscribing I confirm that I want to receive product and news announcements via email from RacingLine Group. Read our privacy policy.

The information contained in this website is for general information purposes only. The information is provided by RacingLine Performance Limited and whilst we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. RacingLine Limited is an independent company and not affiliated with any third party company who may be named or whose logo or products may be represented in this website.