RACINGLINE AUDI RS6, RS7 TCU DSG GEARBOX REMAP, SOFTWARE & TUNING
STRONIC TUNING: THINK SMART
AUDI RS6 & RS7 OEM+ TCU GEARBOX SOFTWARE
S TRONIC UPGRADES
TCU DYNAMIC SOFTWARE OPTIONS
Our OEM+ TCU Dynamic Software & Tuning is simply an essential upgrade to get the most out of any modified 4.0 TFSI S tronic car.
Several years of road and track development have given us the smartest transmission software on the market: by continually feeding the engine ECU’s torque demands through to the gearbox’s controller, the system dynamically calculates and adjusts the box’s variable clutch pressures to suit whatever your power output is.
Meaning that just one RacingLine TCU software upgrade will serve your car from standard, through Stage 1, right up to Stage 3 and beyond. So unlike some, there's no need for a new TCU calibration each time you increase your car’s performance.
WHAT DOES OEM+ TCU TUNING DO?
Our TCU Dynamic upgrades are simply the best modification you can make to your S tronic ZF transmission for the 4.0 TFSI cars.
Our engineers reprogram the gearbox's calibration inside the TCU (Transmission Control Unit). This allows the transmission to maintain higher torque levels. The result? Shifts are even faster, giving harder acceleration through the gears, whatever level of performance your car has - up to and beyond Stage 3.
Meanwhile, the driving mode strategy itself is optimised to suit higher power levels, giving a more natural gear selection profile. Flick the car over to manual, and at last you'll have true gear control at your fingertips - no auto-upshift, no kick down until you command it (or drop back to D/S modes).
Not only that, launch control will get you off the line quicker through allowing more boost at launch and increased launch RPM, combined with a less intrusive traction control in launch mode.
BENEFITS OF OEM+ TCU DYNAMIC SOFTWARE
Our smart TCU software takes its feed from the ECU to calculate torque demands: meaning one flash gives dynamic clutch pressure whatever your engine tune.
By increasing the torque limiters in the gearbox, the 'box will no longer command the engine ECU to pull power back. Meaning the full potential of the engine is no longer limited. Our dynamic TCU map is essential for any car going to Stage 2 or above.
Raised RPM shift points and increased clutch clamping pressure beyond factory torque levels ensure the quickest changes possible for the best performance.
We're all keen drivers, and what better than taking full control of your car with our True Manual Mode. The auto-upshift and auto-downshift is removed to put you in charge of your car again.
PEACE OF MIND
We are uniquely positioned to tap into a
vast knowledge base and resources
network during our development.
OEM+ TCU calibrations will never overstress the gearbox's inherent hardware systems.
Our OEM+ TCU tunes are fully developed alongside our engine ECU software for 4.0 TFSI. giving faster shift times and higher RPM limits in D, S and M modes.
TCU SOFTWARE FOR LIFE.
OUTSTANDING PERFORMANCE. PERFECTLY DELIVERED.
money back guarantee
DO I NEED TCU SOFTWARE?
OEM+ - DELIVERY AND PURCHASE
Currently our OEM+ ECU and TCU software can be purchased and installed through any one of our recognised worldwide dealers. Simply visit our dealer locater page to find your nearest OEM+ agent and drop them a line to find out more information or book in.
Whilst it is not necessary to use RacingLine hardware, all of our OEM+ testing and development has been completed utilising our own products to ensure perfect performance and compatibility. We cannot guarantee power figures or reliability should you wish to use other branded hardware products not manufactured or sold through RacingLine Performance and our associated dealer network.
S TRONIC GEARBOX ZFHP8 (8 speed)
Audi RS6 2013+ 2013-2015 C7
Audi RS6 2015+ 2015-2019 C7.5
Audi RS7 2013+ 2013-2015 C7
Audi RS7 2013+ 2015-2019 C7.5