COOL RUNNINGS.

The higher your power, the harder you drive, the more important it is to protect your oil. 

COOLER OIL MEANS A BETTER PROTECTED ENGINE.

WHY FIT AN OIL 

COOLER KIT?

Under hard driving, the stock oil cooler is easily overwhelmed. Failures start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties.

o

o

The RacingLine kit solves this problem: by adding in an additional air to oil cooler positioned right in the airflow in the front of the car, oil temperatures are reduced by around 15  - 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).

Our kit retains the factory oil to water cooler and adds to it with the front-mounted cooler - doubling up your cooling capability with less heat transfer into the water system.

As the oil moves away from the heat inside the engine, its temperature drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

Supplied as a complete kit with every part ready for install.

Our much-anticipated Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and reliable installation.

 

Adding power to these TSI engines generates more heat to disperse.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your engine to stay properly lubricated. At the same time, it's really important not to over-cool the oil; our 10-row kit is perfect.

HIGH EFFICIENCY COOLER

Our 10-row stacked plate design efficiently forces the hot oil through a series of aluminium pressed plates. Heat dissipates as cold air moves across the plates.

PRESSURE CONTROL

Our unique sandwich plate oil take-off includes a clever internal pressure-control valve control to direct oil flow through the cooler at correct flow/volume.

PRECISION MACHINED

Precision machined billet components utilising

the latest 5 Axis CNC machines for perfect accuracy, first time, every time. 

210 SERIES BRAIDED HOSE

Our oil lines feature an attractive outer nylon braid strengthened by a stainless steel inner weave for maximum resilience. Protective external sheath avoids any rubbing damage in use.

 

COLD AIR LOCATION

The front-mount location brackets of the RacingLine cooler kit places it in the optimum airflow and ensures that oil temperature drops and excess heat is funnelled out efficiently.

HIGH-FLOW FILTER

The kit includes a pretty special high-flowing oil filter. Made from stainless steel micronic filter cloth with magnetic pre-filtering, capable of flowing 5x more oil than the factory paper filter.  

 

racingline oil cooler, golf 7 r oil cooler, golf 7 gti oil cooler, audi s3 oil cooler, seat leon cupra oil cooler,skoda octavia oil cooler

OIL COOLER 

FITMENT.

As you’d expect, the RacingLine Oil Cooler is a beautifully detailed complete kit, developed exclusively for the EA888.3 engine.

 

The system is designed for straightforward fitting and ultimate reliability. Everything needed for perfect fitment is included. 

Unlike some oil cooler kits, with the RacingLine Performance kit there is no need to remove the intake manifold to access oil galleries for a feed in and out of the engine.

Our clever oil filter adapter enables the oil cooler sandwich plate to be installed underneath the current oil filter housing on all EA888.3 engines - just screw off and replace.

This sandwich plate includes an integral pressure relief valving system to protect the system from pressure spikes.

10 row stacked-plate oil cooler radiator, flowed to obtain maximum heat dissipation without undue pressure drop.

Optimum front mounted location behind front lower grill aperture with all necessary brackets and fixing kit supplied.

210 Series stainless steel, nylon braided feed and return lines run past the chassis leg into the bumper cavity, then connecting to the oil cooler core. 

SO WHAT'S IN THE KIT?

AN10 210 series Nylon braided feed and return line.

Oil cooler mounting brackets.

Billet CNC'd oil cooler sandwich plate.

Billet oil filter housing with removable drop in filter.

Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins.

AN10 10-row oil cooler core.

SO WHAT'S IN THE KIT?

AN10 210 series Nylon braided feed and return line.

Oil cooler mounting brackets 

Billet CNC non-return sandwich plate.

Billet oil filter housing with removable drop in filter.

Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins.

AN10 10-row oil cooler core.

racingline oil cooler, golf 7 r oil cooler, golf 7 gti oil cooler, audi s3 oil cooler, seat leon cupra oil cooler,skoda octavia oil cooler

PRECISION ENGINEERED FOR PERFECT PERFORMANCE.

Left-hand threaded oil filter housing top for easy (and clean) oil changes

Stainless steel micronic high-flow filter included in each kit. Supplied separately for oil changes

T6 6061 CNC aluminium used throughout for precision accurate fit

Billet gloss-anodised for long-lasting protection and good looks

Adaptor plate locates under oil filter with pressure-control valving to divert oil flow around new cooling system

CONFIRMED APPLICATIONS

VWR18G700

VW Golf 7 GTI 2013+ 5G

VW Golf 7 R 2013+ 5G
VW Golf 7 GTI ClubSport 2016+ 5G

VW Jetta GLI 2019+A7

VW Tiguan 2.0 TSI 2016+

VW T-Roc R 2.0 TSI 2018+
VW Passat 2.0 TSI B8 2015+ 3G

VW Arteon 2.0 TSI 2017+

Audi S3 2013+ 8V
Audi TT 2.0 TSI III 2014+ 8S
Audi TTS III 2015+ 8S

SEAT Leon Cupra III 2014+ 5F

Skoda Octavia vRS III 2014+ 5E
Skoda Superb 1.8 / 2.0 TSI 2015+ B8 3V

NOTE: 2015 AND OLDER CARS MAY ALSO REQUIRE FITMENT OF VWG PART 06L115678Q (A PLASTIC OIL STEM INSERT). THIS IS A RUNNING UPGRADE FROM VWG DEALERS SO MOST CARS WILL HAVE HAD THIS PART UPDATED DURING EARLIER OIL CHANGES.

racingline oil cooler, golf 7 r oil cooler, golf 7 gti oil cooler, audi s3 oil cooler, seat leon cupra oil cooler,skoda octavia oil cooler

Heading 2

THE OIL FILTER

The Oil Cooler Kit includes a pretty special oil filter. The filter element is made from high-flow stainless steel micronic filter cloth – a medical grade material guaranteed to filter out oil contamination better than paper-based filters, all helping to avoid the risk of resultant engine damage. 

5 times the flow of comparable paper oil filters

Consistent filtering across entire filter surface

Magnetic prefiltering to remove microscopic ferrous materials before they reach the filter itself

The filter itself  is available separately from all RacingLine dealers for servicing. Whilst this filter has a much longer service life than the factory paper elements do, we recommend as best-practice to change filter with every oil-change.

BRACKET SETS

The kit for all MQB carscomes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7/7.5 (non-European models) - which will also serve as a universal mounting kit for other MQB models. 

Mounting for the bracket set requires drilling bolt holes through the front crash bar.

GOLF 7 & MQB MOUNTING

AUDI S3 8V MOUNTING

Our OEM   Performance Software is simply the most effective modification you can make to the 2.0 TSI engine, especially when used alongside our performance hardware.

That's what makes the OEM   difference.

+

+

SOFTWARE DESIGNED FROM THE GROUND UP.

Give your vehicle the OEM   treatment.
+

CHOOSE YOUR MODEL

TO SEE YOUR SOFTWARE 

OTHER PRODUCTS TO SET YOUR PULSE RACING.

OIL MANAGEMENT SYSTEM

The most sophisticated oil management system to separate oil and moisture vapours out of your intercooler and intake charge, and protect against oil-surge.

 

STAGE 3 TURBO KIT

Our OEM+ Stage 3 upgrade offers a complete, turn-key package that is entirely usable on a daily-driven car yet offers devastating performance just one squeeze of the throttle away.

PERFORMANCE INTERCOOLER 

Our giant sized, high efficiency front mounted intercooler is an essential upgrade to keep intake temperatures low - and keep power levels high.

ABOUT US

Forever at the forefront of performance automotive. All of our products are created in the world's toughest development lab: motorsport. We push the limits and reach new heights on track; then refine our products so they always give you the performance you need when you want it on the road.

  • Grey Facebook Icon
  • Grey Instagram Icon
  • Grey Twitter Icon
  • Grey YouTube Icon
© RACINGLINE 2020

NEW RELEASES

Would you like to keep up to date with 

all the latest news and product releases from RacingLine?

Simply enter your details below to be added onto our mailing list and you will be the first to know!

Yes, by subscribing I confirm that I want to receive product and news announcements via email from RacingLine Group. Read our privacy policy.

The information contained in this website is for general information purposes only. The information is provided by RacingLine Performance Limited and whilst we endeavour to keep the information up to date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the website or the information, products, services, or related graphics contained on the website for any purpose. Any reliance you place on such information is therefore strictly at your own risk. RacingLine Limited is an independent company and not affiliated with any third party company who may be named or whose logo or products may be represented in this website.