2.0TSI EA888 GEN 3B 'MAF'
OEM+ SOFTWARE OPTIONS
Our OEM+ Performance Software is simply the most effective modification you can make to a modern turbocharged engine.
Every aspect of an engine’s behaviour is controlled by the calibration software installed on the Engine Control Unit (ECU), your car’s on-board computer.
Read below to see what's on offer from RacingLine's OEM+ for the latest 2.0TSI EA888 Gen.3B engines (producing around 190ps) and how it can significantly & safely enhance the power of your vehicle:
OEM+ COMPARISON
Note - factory power outputs for this engine may vary by model, but tuned figures apply to all.
No modified parts are required for the OEM+ upgrade.
139 KW
320 NM
STOCK
190 PS
320 NM
187 BHP
236 lbft
UNITS
177 KW
389 NM
STAGE 1
240 PS
389 NM
237 BHP
287 lbft
UNITS
STAGE 1
DYNO SHEET
Click to enlarge:
IS MY CAR '3B'?
It's easy to check!
The new 2.0TSI EA888 Gen.3B 'Miller cycle' engines (all producing around 190hp) are becoming ever more popular across the VWG range. But it's easy to verify your car if you're not sure.
As these 2.0 TSI engines are the only ones that use a Mass Airflow Sensor (MAF) it's very simple to check.
Does it have this sensor and wiring shown in the picture? That's the MAF sensor, which means you have the EA888.3B engine.
CONFIRMED APPLICATIONS
2.0 TSI MQB / EA888 Gen.3B 190 hp engine with MAF
> | VW Passat 2.0 TSI 190hp B8 | 2018+ |
> | VW Arteon 2.0 TSI 190hp | 2017+ |
> | VW T-Roc 2.0 TSI 190hp | 2017+ |
> | VW Tiguan II 2.0 TSI 190ps | 2018+ |
> | Audi A3 40TFSI 2.0 TSI 190hp | 2016-2020 |
> | Audi TT 40 TFSI 2.0 TSI 197hp | 2018+ |
> | Audi Q2 40 TFSI 2.0 TSI 190hp | 2017+ |
> | Audi Q3 40 TFSI 2.0 TSI 190hp | 2018+ |
> | SEAT Leon III 2.0 TSI 190hp 5F | 2018+ |
> | SEAT Ateca 2.0 TSI 190hp | 2017+ |
> | SEAT Tarraco 2.0 TSI 190ps | 2018+ |
> | Skoda Octavia III 2.0 TSI 190hp 5E | 2017-2020 |
> | Skoda Superb III 2.0 TSI 190hp 3V | 2019+ |
> | Skoda Karoq 2.0 TSI 190hp | 2018+ |
> | Skoda Kodiaq | 2018+ |
> | Skoda Kodiaq 2.0 TSI 190hp | 2018+ |
HARDWARE OPTIONS
Our OEM+ Performance Software for the EA888.3B has been developed to work with your factory hardware - no changes are needed. However, you'll get the most out of your car if you use some of our matched-in hardware upgrades.
REQUIRED
NOT REQUIRED
OPTIONAL
R600 High Flow Intake
R600 Silicone Inlet hose
90° High Flow Turbo Inlet
Turbo Muffler Delete
Sports Cat Downpipe
High Flow Intercooler
Organic Clutch Kit
DSG Software Tune
NOTE
All of the above power figures are accurate, tested illustrations; however, please do remember that actual power figures can vary up or down slightly dependant on many factors such as the condition of your engine & ancillaries, the fuel quality, other modifications fitted, and even testing methods.
Also please remember that changing your car's software will affect its manufacturer warranty. It is your responsibility to notify your insurer and to ensure that your car still complies with all your local road laws. Please consult your supplying dealer for full information.
SOFTWARE YOU CAN COUNT ON
OUTSTANDING PERFORMANCE PERFECTLY DELIVERED
BENEFITS OF OEM+
UNIQUE APPROACH
It's by reprogramming the very basis
of the controller itself that we
achieve the results we get - just as
the manufacturers themselves work.
MATCHED TO HARDWARE
No other brand can offer you such a
comprehensive 'full-car' tuning
solution. Our Performance Parts
range is the most complete on the
market, all matched perfectly to
the OEM+ software.
GREAT PERFORMANCE
By starting from scratch for each
calibration, OEM+ achieves a very
different level of performance and
drivability. It's never just about winding
up the peak power.
UPGRADES FOR LIFE
Free upgrades on your car for as long
as you own it. Start with OEM+
Stage 1, then we will give you Stage
2 and even Stage 3 Performance
Software for free!
PEACE OF MIND
We are uniquely positioned to tap into a
vast knowledge base and resources
network in our development.
OEM+ software will never overstress the
inherent hardware systems.
RETURN TO STOCK
Should you ever want to return your
car to standard, the OEM+ system
has the facility to return your ECU
to 'True Stock', the exact state it
was in prior to installation of OEM+
tuning.
2.0 TSI & 1.8 TSI MQB / EA888 Gen 3
OEM+ DELIVERY AND PURCHASE
Currently our OEM+ software can be purchased and installed through any one of our recognised worldwide dealers. Simply visit our dealer locater page to find your nearest OEM+ agent and drop them a line to find out more information or book in.
Whilst it is not necessary to use Racingline hardware, all of our OEM+ testing and development has been completed utilising our own products to ensure perfect performance and compatibility. We cannot guarantee power figures or reliability should you wish to use other branded hardware products not manufactured or sold through Racingline and our associated dealer network.
