
AUDI S1 2.0TSI EA888 GEN 3 IS20 - SOFTWARE OPTIONS

Our OEM+ Performance Software is simply the most effective modification you can make to the Audi S1 a modern turbocharged engine.
Every aspect of an engine’s behaviour is controlled by the calibration software installed on the Engine Control Unit (ECU), your car’s on-board computer.
We currently offer three separate stages of performance within the OEM+ range. Take a read below to see what's on offer with OEM+ and how it can significantly & safely enhance the power of your vehicle:
STAGE COMPARISON
For all 2.0 TSI IS20 cars 2013-2018 (pre WLTP GPF models)
Note - stock power outputs vary by model, but tuned figures apply to all.
UNITS
UNITS
UNITS
UNITS
OEM+ COMPARISON
For Audi S1 2.0 TSI IS20 cars 2013-2018
Note - stock power outputs vary by model, but tuned figures apply to all.
UNITS
UNITS
HARDWARE OPTIONS
The below table highlights the minimum hardware requirements for each stage as well as recommending optional components.
REQUIRED

R600 High Flow Intake
R600 Silicone Inlet hose
90° High Flow Turbo Inlet
Turbo Muffler Delete
Sports Cat Downpipe
Performance Fuel Pump
High Flow Intercooler
Organic Clutch Kit
Hybrid Turbo Kit
DSG Software Tune

NOT REQUIRED

OPTIONAL

STAGE 1











STAGE 2








STAGE 3
NOTE
All of the above power figures are accurate, tested illustrations; however, please do remember that actual power figures can vary up or down slightly dependant on many factors such as the condition of your engine & ancillaries, the fuel quality, other modifications fitted, and even testing methods.
Also please remember that changing your car's software will affect its manufacturer warranty. It is your responsibility to notify your insurer and to ensure that your car still complies with all your local road laws. Please consult your supplying dealer for full information.
OEM+ LIKE FACTORY, BUT BETTER
PERFECT PERFORMANCE YOU CAN DRIVE EVERYDAY.....
HARDWARE OPTIONS
The below table highlights the minimum hardware requirements for each stage as well as recommending optional components.
REQUIRED

NOT REQUIRED

OPTIONAL
RL High Flow Intake
Silicone Inlet hose
90° High Flow Turbo Inlet
Turbo Muffler Delete
Sports Cat Downpipe
High Flow Intercooler
Organic Clutch Kit
STAGE 1







NOTE
All of the above power figures are accurate, tested illustrations; however, please do remember that actual power figures can vary up or down slightly dependant on many factors such as the condition of your engine & ancillaries, the fuel quality, other modifications fitted, and even testing methods.
Also please remember that changing your car's software will affect its manufacturer warranty. It is your responsibility to notify your insurer and to ensure that your car still complies with all your local road laws. Please consult your supplying dealer for full information.
BENEFITS OF OEM+

UNIQUE APPROACH
It's by reprogramming the very basis
of the controller itself that we
achieve the results we get - just as
the manufacturers themselves work.

MATCHED TO HARDWARE
No other brand can offer you such a
comprehensive 'full-car' tuning
solution. Our Performance Parts
range is the most complete on the
market, all matched perfectly to
the OEM+ software.

GREAT PERFORMANCE
By starting from scratch for each
calibration, OEM+ achieves a very
different level of performance and
drivability. It's never just about winding
up the peak power.

UPGRADES FOR LIFE
Free upgrades on your car for as long
as you own it. Start with OEM+
Stage 1, then we will give you Stage
2 and even Stage 3 Performance
Software for free!

PEACE OF MIND
We are uniquely positioned to tap into a
vast knowledge base and resources
network in our development. And we're confident enough that you'll love it that we offer a 30 day full money-back guarantee.

RETURN TO STOCK
Should you ever want to return your
car to standard, the OEM+ system
has the facility to return your ECU
to 'True Stock', the exact state it
was in prior to installation of OEM+
tuning.
THE PERFECT COMPLIMENT TO YOUR OEM+
All OEM+ software has been developed around our popular hardware performance parts. Make the most of your OEM+ calibration with any (or all) of our intake upgrades. Compatible with all Stage 1, essential for Stages 2 & 3.
OEM+ DELIVERY AND PURCHASE
Currently our OEM+ software can be purchased and installed through any one of our recognised worldwide dealers. Simply visit our dealer locater page to find your nearest OEM+ agent and drop them a line to find out more information or book in.